Description
| Material Type: | Aluminum 6061-T6 T=2.50+/-0.02mm | Surface Treatment: | Polishing, Brushing, Painting, Coating |
|---|---|---|---|
| Quality Control: | 100% Inspection Before Shipping | Supply Capacity: | Fast Prototype, Low Volume Production |
| Manufacturing Precision: | 0.05mm - 0.50mm | Delivery Method: | Express, Air Freight, Sea Freight |
| Highlight: |
2.5mm prototype sheet metal stamping,2.5mm sheet metal stamping prototype,fast prototype sheet metal stamping |
||
RAW MATERIAL INFORMATION OF PROTOTYPING
6061 Aluminum plate (AMS 4027) is one of the most versatile grades of high strength, heat treatable aluminum alloys. The T6 temper is achieved through a solution heat treatment and artificial aging to achieve the greatest level of precipitation hardening, and it resists stress cracking due to the inclusion of magnesium and silicon as major alloying elements.
It is used for engineering and structural applications, boats, furniture, stairs, and more. With an excellent strength to weight ratio, good toughness, and high corrosion resistance, it’s no wonder that 6061 aluminum alloys are so widely used. Our plate stock is available in a variety of thickness, and we are capable to provide wide range aluminum prototype fabrication services for appliances, vehicles, architecture industries etc.
| Raw Material Properties | ||||||||||||
| Material Grade/ Description |
Chemical Composition (weight %) | T.S (Mpa) |
Y.S (Mpa) |
EL | HV | |||||||
| (Cu) | (Si) | (Fe) | (Mn) | (Mg) | (Zn) | (Cr) | (Ti) | |||||
| Aluminum 6061-T6 | 0.0043 | 0.6 | 0.4 | 0.0061 | 0.9 | 0.0070 | 0.2100 | 0.0140 | 340Mpa | 315Mpa | 8.0% | 82 |
Start your project today! The team at Metalstar Prototype is always fulfilled with passion and professionalism to assist you to turn your innovative ideas into practical solution.